banner



What Is The 7610s Current Draw During Typical Standby?

IC-7610

Specifications

General
Frequency coverage
Rx
Tx

0.030– 60.000 MHz *1
1.800–1.999, iii.500–3.999, five.255–5.405*two
7.000–vii.300, 10.100–10.150, 14.000–14.350,
18.068–18.168, 21.000–21.450, 24.890–24.990,
28.000–29.700, l.000–54.000 MHz
*1 Guaranteed range: 0.500–29.999, fifty.000–54.000 MHz.
*2 Some frequency bands are not guaranteed.

Mode USB, LSB, CW, RTTY, PSK31/63, AM, FM
Number of channels 101 (99 regular, 2 browse edges)
Antenna connectors SO-239 × 2 (l Ω unbalanced (Tuner off))
BNC × 1 (RX antenna In/Out)
Power supply requirement 13.eight V DC ±15%
Operating temperature range 0°C to +50°C; +32°F to +122°F
Frequency stability Less than ±0.5ppm
(0°C to +50°C, subsequently warm up)
Frequency resolution ane Hz (minimum)
Power consumption
TX
RX

23 A (at 100 W output ability)
iii.0 A (Standby), 3.v A (Maximum audio)
Dimensions (W×H×D)
(projections not included)
340 × 118 × 277 mm;
13.iv × 4.6 × x.9 in
Weight (approx.) eight.5 kg; 18.vii lb
Transmitter
Output power (HF/50 MHz) SSB/CW/FM/RTTY/PSK: 1–100 W
AM: 1–25 Westward Digital P.South.North.
Modulation arrangement
SSB
AM
FM

Digital P.S.Due north. modulation
Digital low power modulation
Digital Reactance modulation
Spurious emission
HF Bands
50 MHz band

Less than –50 dB
Less than –63 dB
Carrier suppression More than l dB
Unwanted sideband More than l dB
Microphone impedance 600Ω (8-pin connector)
Receiver
Receiver system Direct Sampling Superheterodyne
Intermediate frequencies 12 kHz
Sensitivity*3
SSB/CW (at 10 dB Southward/N)
AM (at x dB Due south/Due north)
FM (at 12 dB SINAD)

0.v– 1.799 MHz

six.three μV typ.

1.8– 29.999 MHz
0.16 μV typ.
2.0 μV typ.

28.0– 29.7 MHz


0.v μV typ.

50–54 MHz
0.13 μV typ.
ane.0 μV typ.
0.32 μV typ.

*3 HF: Preamp ane ON, 50 MHz: Preamp ii ON, BW: SSB/CW=2.4 kHz, AM=6 kHz, FM=15 kHz

Squelch sensitivity (Threshold) SSB: Less than 3.two μV (Preamp ON)
FM: Less than 0.32 μV (Preamp ON
Selectivity (Filter shape: Sharp)
SSB (BW: 2.four kHz)
CW (BW: 500 Hz)
RTTY (BW: 500 Hz)
AM (BW: 6 kHz)
FM (BW: 15 kHz)

More than than
two.four kHz/–vi dB
500 Hz/–6 dB
500 Hz/–six dB
6.0 kHz/–half dozen dB
12.0 kHz/–half dozen dB

Less than
3.vi kHz/–60 dB
700 Hz/–lx dB
700 Hz/–60 dB
15 kHz/–60 dB
20 kHz/–60 dB

Spurious and prototype rejection ratio
HF bands
fifty MHz band

More than 70dB
More than 70 dB (Except for ADC Aliasing)
Audio output power More than 2.6W at 10% distortion with an 8Ω load
Tuner
Frequency range ane.9–50 MHz bands
Matching impedance range 16.seven Ω–150 Ω unbalanced (VSWR better than iii: 1)
Tuning accuracy VSWR 1.5: 1 or less
Tuning time 2–3 seconds (average) (Maximum xv seconds)

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Paw microphone, HM-219
  • DC power cable
  • Fuses
  • Plugs

Source: https://www.icomamerica.com/en/products/amateur/hf/7610/specifications.aspx

Posted by: kennedyuted1981.blogspot.com

0 Response to "What Is The 7610s Current Draw During Typical Standby?"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel